Solar Panels for Your Kendall Home, Planned Around Your Roof

Solar panels for a Kendall home work best when the roof is checked first. The roof decides where panels can go, how they are fastened, and how long they will stay there. ASP Superhome plans solar and roofing together, so you get one clear picture before you commit.

Solar panels for Kendall homes start with the house itself

Solar planning in Kendall starts with your specific house, not a standard package. Kendall is a community in unincorporated Miami-Dade County. Homes here include single-family houses and townhomes, with roofs of many ages and styles.

Three things shape a rooftop system on any home. The first is roof direction and how much sun reaches the panels. The second is shade from trees and neighboring buildings, which is common in older Kendall neighborhoods. The third is the roof’s remaining life. Panels stay on the roof for many years, so an aging roof needs a closer look.

Your electrical service matters too. The site visit checks the roof and the electrical service, and it shows what each one can handle.

How a rooftop solar system goes onto a Kendall roof

A rooftop system is installed in steps, and the utility connection comes near the end. The usual sequence is a roof and electrical assessment, a mounting plan, a layout for panels and the inverter, permitting, installation, and then connection to the grid.

Permits matter. Unless otherwise provided by law, Florida law makes it unlawful to repair or alter a building without first getting a permit from the enforcing agency, as Fla. Stat. § 553.79 explains.

Florida Power & Light (FPL) serves much of Miami-Dade County, including Kendall. Code R. 25-6.065, the customer must notify the utility at least 10 days before the system is first placed in service. The utility may send personnel to be present on that day.

Mounting hardware also depends on your roof. Tile and metal roofs call for different attachment methods, so the plan is matched to the roof covering you already have.

Solar battery backup: what it does for your home

Solar battery backup stores energy from the panels so you can use it later, including during some power outages. The battery size and the loads you want to keep running are the main design inputs. Your written estimate sets these out for your home, so you can compare options on the same page.

Battery systems are also covered by Florida’s building code. The Florida Building Commission’s 2026 analysis says section R328 changed from “Stationary Storage Battery Systems” to “Energy Storage Systems,” as shown in the Florida Building Commission analysis of changes.

Ask us how it applies to your project.

Check your roof before you add solar panels

Check the roof first, because panels are fastened to it for years. Roof age, condition, and remaining life decide whether to repair, replace, or add panels to what is already there.

Florida’s 2026 code sets rules for when a roof can be recovered instead of replaced. The Florida Building Commission analysis notes that the upper roof covering may be removed during recovery when the existing or repaired base is adequate for the new covering.

Fixing the roof first can save a second job later. Removing and reinstalling panels to reach a failing roof adds labor and cost. Our roof repair, roof replacement, tile roofing, and metal roofing work can be scoped in the same estimate as the panels.

Metal roofs have their own detail. The EPA explains that reflective, light-colored metal roofing can reduce solar heat transfer and indoor temperatures, which may ease air-conditioning use in warm climates, as described in Using Cool Roofs to Reduce Heat Islands.

Storm readiness for a South Florida solar system

Storm planning covers the panels, the roof under them, and the openings in the home. Hurricane season affects all three.

Florida law sets roof rules for storm protection. Under Fla. Stat. § 553.844, a roof replacement on a site-built single-family home must incorporate specified windstorm mitigation techniques. Homes in the wind-borne debris region with an insured value of $300,000 or more are subject to roof-to-wall connection requirements at roof replacement only if evaluation and installation of connections at gable ends or all corners can be completed for 15 percent of the cost of roof replacement; if the building is uninsured or for which documentation of insured value is not presented, it is covered when its just valuation for the structure for purposes of ad valorem taxation is $300,000 or more.

Miami-Dade County has also evaluated a Florida-approved metal roofing panel that can be made in a barrel-tile profile. The approval covers compliance with the Florida Building Code, including its High Velocity Hurricane Zone provisions. See the Miami-Dade County product approval.

Storm protection also includes impact windows and impact doors. These are part of the same home-solutions scope, so the estimate can review them with the roof and solar layout. The assessment reviews how the roof and system are attached and secured. No plan can promise how a home will perform in a particular storm.

Your free first consultation and written estimate

To get started, a free first consultation sets up a site visit to your roof and electrical service. After that, you receive a written estimate covering the panels, battery backup options, and any roof work.

The first consultation is free, confidential, and carries no obligation to continue.

Frequently asked questions