Impact Front Entry Doors Built for South Florida Storms

Impact front entry doors in South Florida are hinged or sliding entry doors built to resist wind-borne debris, such as flying branches, gravel, and loose patio furniture, during a storm. They use laminated impact glass and a reinforced frame. ASP Superhome offers custom impact front doors for homes in Miami, Kendall, Fort Lauderdale, West Palm Beach, Boca Raton, Naples, and Fort Myers. This guide explains what’s included, how the process works, and what to ask before you order.

What an Impact Front Entry Door Is and Who It’s For

An impact front entry door is an entry unit tested to stand up to flying debris. The glass is laminated, meaning two layers of glass are bonded around a tough plastic layer. If the glass breaks, the pieces tend to stay bonded in the frame.

Florida law sets rules for these products. Exterior doors can be approved under statewide approval through Fla. Stat. § 553.842 or under local product approval through Fla. Stat. § 553.8425. A product can’t be advertised or sold as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm unless it has approval under this section or § 553.8425 (Fla. Stat. § 553.842).

Whether your home must have impact protection depends on its location and local rules.

This door suits three kinds of owners:

• Homeowners in coastal or wind-exposed neighborhoods.
• Owners replacing a warped, dented, or aging door.

The front door is one of the main openings in a home. Protecting it is a practical step, especially before storm season.

What’s Included in a Custom Impact Entry Door

A complete impact entry door is a system of parts. Each part affects how the door performs, so review every line of the quote.

• Impact-rated frame and glass: Laminated impact glass set in a reinforced frame. Ask about glass thickness and style options.
• Locking hardware: Multi-point locks and heavy-duty hinges, with finish and handle choices.
• Weatherstripping: Full perimeter seals that limit air and water getting around the door.
• Threshold: A sealed base that keeps water out at the floor.
• Custom sizing: Single, double, sidelite, or transom configurations matched to your opening.

Salt air is hard on metal parts. Ask whether the frame and hardware are corrosion-resistant before you pick a finish.

Check the rating before you sign. Local product approval under Fla. Stat. § 553.8425 is shown to the local building official, who reviews and accepts it, and it is valid in that jurisdiction. Ask for that label or the approval documents for the exact unit in your quote.

Approval has limits. A statewide Florida product approval generally stays in effect only while the manufacturer makes no modifications that alter how the product performs and while it still complies with the Florida Building Code edition in force. When a new code edition changes the relevant requirements, the product may need to be re-evaluated before the approval applies. Ask how the approval applies to your specific door.

How the Process Works, Step by Step

The process starts with a free, confidential consultation, and there is no obligation to continue after it. Here is what usually follows.

1. Consultation. Share your opening size, style goals, and any HOA or permit questions. Bring photos of the current door if you have them.
2. Site measurement.
3. Written quote.
4. Order and production. Your custom unit is built to your measurements and chosen configuration.
5. Installation. The door is set, sealed, and checked.

Timing depends on custom lead times, permit requirements, and site conditions. Ask questions at each step before work moves forward.

Impact Entry Doors from ASP Superhome

ASP Superhome is a complete home solutions company for South Florida. We offer impact doors and impact windows, metal and tile roofing, roof repair and replacement, solar panels, solar battery backup, and kitchen remodeling.

Having these services under one company helps when your entry door work overlaps with other exterior projects. Our team can review the door alongside windows, roofing, or other work on the same home.

We serve Miami, Fort Lauderdale, West Palm Beach, Kendall, Naples, Fort Myers, and Boca Raton. You can ask for the approval paperwork on any door in your quote, so the rating is something you can verify.

Common Questions and Concerns About Impact Front Doors

Most concerns come down to light, upkeep, style, and disruption. Each one has a practical answer.

FAQ: Impact Front Entry Doors in South Florida

What makes a front door impact-rated? It is tested to resist wind-borne debris and backed by approval documents. Ask for the paperwork on the exact unit you’re buying.

Is the first consultation free? Yes. The first consultation is free, confidential, and carries no obligation to continue.

Which areas do you serve? We serve Miami, Kendall, Fort Lauderdale, West Palm Beach, Boca Raton, Naples, and Fort Myers.

How long does an impact front door take? It depends on custom lead times and permits. Your written quote will state the schedule.

Can you keep my existing frame? That depends on the frame’s condition and the size of the opening. We check both during the on-site measurement.

Do I have a right to cancel if I sign at home? Florida law can give you that right. For a home solicitation sale, you may cancel until midnight of the third business day after you sign (Fla. Stat. § 501.025).

Ready to Replace Your Front Door?

If your entry door is cracked, warped, or letting in drafts, the next step is a conversation. Reach out for your free, confidential consultation, with no obligation to continue. We’ll measure your opening and send a written quote for a custom impact front door that fits it. You can start on the ASP Superhome contact page.